Best Track Saw Reviews For The money In 2019
Track saws are a handy tool that most woodworkers can use for pretty much any project. Having a reliable power tool to make long, accurate cuts or to cut sheet material is a vital tool to have in your garage. Make sure you find the right track saw with enough power, RPMs, and bevel capacity to take on all the projects you have planned. Here are a few tips on what to look for in the best track saw in 2019 and a few track saw reviews to help you start shopping.
Buying Guide: Best Track Saws In 2019
What Is A Track Saw And What Are They Used For?
With a look similar to a circular saw, a track saw can make cuts that would be impossible for a circular saw to tackle. And, like a table saw, track saws have a fast spinning blade, but instead of taking the material to the saw like a table saw, a track saw is taken to the material.
The feature that sets the track saw apart from these other saws is the track itself. It keeps the material in place but gets rid of the need to guess or measure where to cut as there are guides that tell you. You also get a retractable blade that guarantees that you won’t cut anything until you are ready to.
Benefits Of A Track Saw
What To Look For When Buying A Track Saw?
Track Saw Blades
When buying a blade for a track saw, you actually use the same process as buying a blade for a circular saw. After determining the blade size your tool uses, you then need to decide on the material your blade should be made from. Metallic alloy blades with carbide tips are the most common since they can withstand heavy use and have a long blade life. They are also heat resistant so you don’t have to worry about burning the wood along the cut line.
Blades with fourteen teeth are good for cutting wood or lumber pieces but they won’t give you a finished edge. When working with plywood or other sheet materials, you want a blade with about 48 teeth to give you a finer cut that won’t need sanding or smoothing.
Giving you the ability to cut at an angle, the bevel capacity of a saw will increase your versatility so that you can tackle different types of projects. Most models that have the ability to make bevel cuts will range between -1 and 48 degrees. Basically, this means that you can cut straight down as well as cut an angle increasing your ability to do different projects.
Maximum Speed (RPM)
Known as revolutions per minute, the saw blade’s speed is measured in RPMs. Typically, a saw will have a minimum of 2,000 RPM that can cut through thinner pieces of wood. To get more versatility out of your track saw, look for a wide RPM range between 2,000 to 3,000 with some models even going up to 5,000 RPM. This will give you the ability to take on almost any project that requires both slow and fine cuts as well as much faster cuts.
Ensuring that you are always on target, the guide rail will help you stay along your cut line. This is particularly helpful when you make long and straight cuts. Every track saw differs in the length that it can cut, however you can attack extra connectors to the track to add length and your ability to make long cuts.
When working on materials that are easy to chip or splinter, it is handy to have a score-cut setting. When you score the material before making a full depth cut, you can create a splinter-free cut on both sides of the kerf instead of just on the side of the track. This is a real time-saving feature instead of having to waste time going back after the cut and clean it later.
It is always important to consider the cutting capacity of any saw before you buy it to make sure it can handle the projects you have planned.
This is a great safety feature that stops the risk of the saw jumping from the torque at start-up that is also called a kickback.
Allowing you to adjust the blade’s speed, the speed dial is a convenient feature when you work with different thicknesses and types of materials. Allowing you to adjust the speed dial gives you more versatility in the types of materials and the types of projects you can work on.
Dust Collection System
Helping to keep your work area clean and safe, a dust collection system can enclose the blade to act like a dust guard or even include a vacuum hose that can be attached to the track saw for easy cleanup.
Best Track Saw System Reviews On The Market In 2019
For accurate and precise cutting, the Makita SP6000J1 Plunge Circular Saw gives you a mirror finish that is splinter-free without needing a table saw. Giving you straight and smooth cuts, the Makita features a guide rail system that is optional made out of anodized aluminum. The rail and saw work together to give you precise cuts with little tear-out.
Featuring a powerful 12 amp motor, the Makita has a large cutting capacity and weighs less thanks to its magnesium components. You also get electronic speed control that allows you to maintain a consistent speed under load for a mirror finish and smooth cutting. This is a very portable saw that is perfect for use in either your shop or on the job site.
With a bevel capability of -1° to 48°, the Makita has positive stops at 45 degrees and 22.5 degrees. With close-to-wall cutting, this saw can be expanded for different cutting projects. The built-in depth stop also allows you to make a preliminary cut of 1/16 inches before you cut the entire materials to give you splinter-free, clean cutting.The Makita also comes with a soft start so you have smooth startups. The variable speed dial control gives you between 2,000 and 5,200 RPM so you can choose the speed that will give you the best performance for the material you are working on. Plus, the built-in torque limiter will help to stop motor burnout while the electric brake gives you additional productivity
With unmatched precision, the Festool 575388 Plunge Circular Saw works on a wide range of projects and materials. You actually will be able to do more with less equipment, space, and time thanks to the system’s efficiency. And, with the precision you get from its guide rail, you will get a perfect cut each time that are splinter-free and straight.
Depth indicator controls are micro-adjustable with two cursor lines that give you precise cuts on or off the guide rail. The Guide Rail Splinterguard also reduces rework and waste of material while giving you no tear-out cuts.
The integrated riving knife is spring-loaded and keeps the cut kerf open as well as the material away from the back of the blade giving you more control. This also helps to reduce the risk of kickback. With the ability to handle any surface, the Festool 575388 comes in two sizes with nine types of blades available.
Perfect for contractors, woodworkers, and finish carpenters, the DEWALT DWS520K gives you both cut-quality, and precision that you normally see in a table saw. This portable Track Saw also gives you precise and straight cuts that are splinter-free, plus you get the capacity normally see in a panel saw. Featuring a 1,300-watt motor, this track saw has enough power to cut through hardwoods and pretty much any construction or woodworking materials.
Featuring aluminum track with an anti-slip feature, you can make clean and straight cuts while the zero-clearance track gives you edges that are splinter-free and indicate the precise cut location so your cutting position will be accurate, predictable, and fast. Under the track, you will find two friction strips that will grab onto the wood and prevent the track from moving with the need for added clamps. On top are glide strips with low-friction that let the saw travel smoothly over the track.
With the straight plunge mechanism, you can make straight and clean cuts while the continuous anti-kick-back feature gives you more control by letting the saw only move forward on the track stopping kickback. Also included in the DEWALT DWS520K is a dust management system that features a universal 1-1/4-inch dust port allowing you to collect up to 90 percent of excess debris and dust. A 48 tooth, 6 ½ inches blade comes with a laser cut plate and teeth that are precision ground teeth for incredible cut quality.
The DEWALT DWS520K features bevel stop at 1 5/8 inches at 45 degrees and 2 1/8 inches at 90 degrees bevel allowing you the versatility to cut through a range of commonly used materials. With the specially designed blade, you can lessen deflection to provide a finished edge similar to a table saw. This saw allows you to cut several pieces of wood at once, trim doors on the hinges, cut cabinet opening, cut inlay and hardwood flooring, make rip, crosscuts, and miter sheet goods, as well as edge joining.
If you are looking for a portable saw to make precise cuts, the Shop Fox W1835 Track Saw was created to be used with the optional accessory pack and guide rail to make plunge cuts, cut full sheets of plywood, and trim the bottom of doors. Featuring a plunge cut action, the Shop Fox delivers a true riving knife for increased safety even when you aren’t using the guide rail and gives you accurate cuts with almost no tear-out. Perfect for projects where you need to remove an area inside a workpiece, the plunge action gets rid of the need for flip-up blade guards that can be dangerous.
With the optional accessories, the Shop Fox gives you precise and fast cuts with very little setup time. The guide rail can be used to make both plunge and straight cuts. The accessory pack includes a stabilizer to use with the track, a stop, and two F-clamps that help you get uniform cuts consistently, particularly when doing bevel cuts.
The portable Shop Fox W1835 is an affordable track saw that comes with a bevel gauge that locks to perform bevel cuts up to 45 degrees. You also get a 1 ½ inch dust port that is adjustable as well as secondary handles that give you more stability when cutting. The included riving knife is spring-loaded to lessen the chance of pinching or kickback for additional safety.
Very versatile, the Triton TTS1400 Plunge Track Saw has advanced safety features, fast set up, and easy mode selection. With a powerful 1400 Watt motor with variable speed, the Triton has a no-load speed between 2000 and 5300 rpm. You also get quick changes between modes with the convenient mode selector that lets you choose either blade change, scribe, or free plunge. Safe and easy blade changes are made with easy access through the blade guard so you don’t have to take off the cover. Plus, you get handles with a soft grip and a guide track system that give you accurate bevel and straight cuts.
This versatile track saw provides straight and long cut when fitted to the track. The blade housing has a flat design allowing the saw to work right up against the edge of the materials which is great when working on doors and flooring. Added stability is provided by the guide rail track providing you with precise and professional cuts each and every time.
The Triton is great for cutting hardwood flooring or trimming doors. You also get onboard tool storage and variable speed that features both constant speed electronics and a soft start. Other features include a bevel range of 0 – 48 degrees, anti-kickback for increased safety, and a very efficient dust pot with a universal adapter and 360-degree outlet.
The winner of the Best Track Saw Roundup is the DEWALT DWS520K TrackSaw Kit. Giving you the precision and quality usually seen in a table saw, you also get the cut capacity of a panel saw.
The Dewalt gives you enough power to cut through pretty much any type of material as well as an aluminum track that has an anti-slip feature that allows you to make straight and clean cuts.
With the zero-clearance track, you get edges that are splinter-free while the straight plunge mechanism lets you make straight and clean cuts. The continuous anti-kick-back feature gives you more control by letting the saw only move forward on the track stopping kickback.
Other features include a dust management system, bevel stops at 1 5/8 inches at 45 degrees and 2 1/8 inches at 90 degrees bevel, and a specially designed blade that lessens deflection to provide a finished edge similar to a table saw. The definite winner of the Best Track Saw Roundup is the DEWALT DWS520K TrackSaw Kit hands down.